Fermanagh
order
England
- Regular price
- £4,700.00
- Regular price
-
- Sale price
- £4,700.00
- Unit price
- per
- Availability
- Sold out
Reaper Saw Head 900 — Excavator Saw Head | Built in Fermanagh
For 10 to 14 tonne excavators • Cuts up to 450mm diameter • 900mm Hardox 450 blade as standard • Custom headstock built to your machine
The Reaper Saw Head 900 is a heavy-duty precision circular saw head built for larger excavators tackling serious hedge management and forestry work. Fitted as standard with a 900mm Fine Cut Hardox 450 blade, it cuts branches and stems up to 450mm diameter with power and precision in a single pass. A 900mm Rough Cut blade is available as an alternative for heavier commercial work. Built for contractors running 10 to 14 tonne excavators who need to get through heavy vegetation quickly, cleanly and safely.
Hand-built to order at our workshop in Fermanagh, Northern Ireland, and used by contractors across Northern Ireland, ROI and England.
When that machine stops, the cost of standing idle hits hard. Add a short season, Irish weather cutting into your working days, and the ongoing expense of replacing worn blades. The Reaper 900 is built for contractors who need a powerful, reliable excavator attachment that earns its keep through the season — and gets sorted fast in our own workshop when it needs attention.
"She cuts through everything — never missed a beat all season."
Contractor, Northern Ireland • Reaper Saw Head owner
- 900mm Fine Cut Hardox 450 blade fitted as standard — 900mm Rough Cut available for heavier work, both re-tippable in our Fermanagh workshop to extend working life
- Cuts branches and stems up to 450mm diameter
- Custom headstock included as standard — precision built to your exact excavator pin size
- Built for 10 to 14 tonne excavators — serious power for heavy vegetation and forestry work
- Hydraulic flow: 70 to 120 lpm at 3000 psi
- Heavy-duty construction for commercial hedge management and forestry contracts
- All maintenance carried out in our own Fermanagh workshop to minimise your downtime
| Specification | Reaper Saw Head 900 |
|---|---|
| Blade diameter | 900mm |
| Max cutting diameter | 450mm |
| Excavator range | 10 to 14 tonne |
| Hydraulic flow | 70 to 120 lpm |
| Operating pressure | 3000 psi |
| Blade steel | Hardox 450 |
| Blade included | 900mm Fine Cut — as standard |
| Headstock | Built to your spec |
| Re-tipping service | Available — Fermanagh workshop |
| Build type | Made to order |
| Origin | Fermanagh, Northern Ireland |
| Model | Excavator size | Blade diameter | Max cut |
|---|---|---|---|
| Reaper Saw Head 600 | 4 to 8 tonne | 600mm | 350mm |
| Reaper Saw Head 900 You are here | 10 to 14 tonne | 900mm | 450mm |
The Blade That Comes With Your Reaper Saw Head 900
Every Reaper Saw Head 900 is fitted as standard with a 900mm Fine Cut Hardox 450 blade. We make the blade ourselves in our Fermanagh workshop from Hardox 450 steel, an abrasion resistant grade used where ordinary mild steel wears out. It cuts branches and stems up to 450mm diameter in a single pass.
Fine Cut or Rough Cut? Pick the Blade for the Job
900mm Fine Cut (fitted as standard)
For commercial hedge management, boundaries, verges and general scrub clearance, where you want a cleaner finish left behind.
900mm Rough Cut (available as an alternative)
A heavier tooth profile for thick scrub, broken timber and mixed forestry material, where a rougher finish is fine.
Not sure which blade suits the trees and hedges you cut? Tell us what you are cutting and the finish you want to leave, and we will tell you which blade to fit before you order. Call 07734 357045 or email us. You can also see all our Reaper saw head blades.
We Re-Cut and Re-Tip Blades
When the teeth wear down, you do not need a new blade. Bring it back to our Fermanagh workshop and we will restore it. Rough cut blades get new teeth welded on, and fine cut blades have the teeth recut back into the blade. Because we make the blades ourselves, we know how to restore them properly. That means a longer working life for your blade and money saved over the life of the machine.
Call us first and send photos before you post anything. Not every blade can be re-cut, and we will give you an honest opinion before you send it in. Email photos of the worn blade to mcelhillengineeringltd@hotmail.com or call 07734 357045. The full steps are on the 900mm Fine Cut and 900mm Rough Cut blade pages.
Running two blades? Rotate them. Send one in for re-cutting while the other stays on the machine, so you lose no days in the field.
Problems Contractors Deal With, and How the Reaper 900 Answers Them
A worn blade means buying a new one
Our blades are Hardox 450, made in our own workshop, and they can be re-cut or re-tipped instead of replaced. You pay to restore the blade, not to buy a whole new one.
A short season and wet ground
Hedge cutting runs from 1 September to 28 February, and wet fields cut into the days you can get an excavator on the ground. Every working day counts, so the Reaper 900 is built with heavy duty construction for commercial hedge management and forestry contracts.
A breakdown in the middle of the season
We build it and we fix it. All servicing and repairs are done in our own Fermanagh workshop by the people who built the machine, to keep your downtime as short as possible. Hydraulic hoses, Ram refurbishment and welding are done there too. See our workshop services.
An attachment that does not fit properly
A custom headstock is included as standard, built to your exact excavator pin size, for 10 to 14 tonne excavators. If you are not sure it suits your machine, call us with your excavator make and model and we will confirm before you order.
Built for Cutting in Ireland
In Ireland, hedges are cut in autumn and winter, when the weather is at its worst and the working window is short. Wet fields, mud and long days are part of every contract. That is why the Reaper 900 is built the way it is: a Hardox 450 blade made in our own workshop, heavy duty construction for commercial hedge management and forestry work, and a custom headstock matched to your excavator. When it needs attention, it comes back to the workshop in Fermanagh where it was built.
Talk to the people who build it
Not sure which blade, or want a worn blade looked at? Call us, or send an email and we will come back to you with a straight answer.
Fermanagh workshop, Monday to Friday, 9am to 5pm.
Ready to order your Reaper Saw Head 900?
Build slots fill as the season approaches. Call today to confirm the right spec for your machine and secure your place in the build queue.
Or email mcelhillengineeringltd@hotmail.com Made to order in Fermanagh, Northern Ireland